Help Support Ruger Forum:
K
KneverKnew
- Messages
- 29
- Reaction score
- 20
Latest activity Postings Media About Post areas
-
-
KKneverKnew replied to the thread Adjustable Gas Block on SFAR?.I understand the 3’-4’ for a 5.56 but does that same rule apply to 308?
-
KKneverKnew replied to the thread Adjustable Gas Block on SFAR?.Gee, I though getting it down to 6’-8’ from 10’-12’ was doing good. 😂 I will continue my adjustment tests.
-
K"When I swapped the long spring in place of standard spring the bolt would not lock back." This usually means the compressed spring is...
-
KKneverKnew replied to the thread Adjustable Gas Block on SFAR?.Range results with the SFAR using Aero Precision AGB. I tested with Austrian 7.62 (STG-58.) I used a standard carbine spring and 3oz...
-
KKneverKnew replied to the thread Adjustable Gas Block on SFAR?.Thanks for your input Mobuck. My plans line up with your suggestion. Right now I am doing a deep dive cleaning of the SFAR to have a...
-
KKneverKnew replied to the thread Adjustable Gas Block on SFAR?.I’ve installed an aero precision adjustable gas block on my 20” SFAR. now I’m wondering if I should tune it with the standard 3oz buffer...
-
KKneverKnew replied to the thread Adjustable Gas Block on SFAR?.I appreciate the help. For the time being I’m going to try a spare aero precision adjustable gas block I have on hand. Just need a rifle...
-
KTry to measure the distance from gas block boss to gas tube on the SFAR and compare that to same on your 7.62x39 AR. What does the SFAR...
-
KKneverKnew replied to the thread Adjustable Gas Block on SFAR?.I have an Aero Precision adjustable gas block. I need to order a rifle length gas tube. Any idea if the SFAR will need a standard gas...
-
KKneverKnew replied to the thread RUGER SFAR PROBLEM SOLVED UPDATE.I agree. I think this is related to the problem of over gassing causing the system to try and unlock too soon/ bad timing. So…a new...
-
K"Even with H3 the two ejectors are cause bright rub marks, and sometimes raising metal burs." Still sounds like an issue hiding in this...
-
KKneverKnew replied to the thread RUGER SFAR PROBLEM SOLVED UPDATE.Even with H3 the two ejectors are cause bright rub marks, and sometimes raising metal burs. An adjustable gas block may be necessary to...
-
KKneverKnew replied to the thread RUGER SFAR PROBLEM SOLVED UPDATE.I’ve seen improvement with the H3 buffer but think I need to get a flat wound spring that is a bit stronger. Maybe then go down to H2...
-
KKneverKnew replied to the thread Adjustable Gas Block on SFAR?.Today I’m loading up some 168 SMK’s to around 2600 fps. H3 buffer is installed. Will get to range today or tomorrow to test those along...
-
KKneverKnew replied to the thread Adjustable Gas Block on SFAR?.I appreciate the info. Even if the Adam’s system won’t work on the SFAR I’m interested in using it on one of my AR-47’s. 👍
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
