crow#2
Single-Sixer
I'm trying to be as cautious as I can. So ? According to oal and given a lead bullet with a crimp groove ,I cannot get the reccomended oal due to trying to get the crimp groove in position so the case mouth will be crimped into the groove. Second ? Since I mostly load on the starting grains and very seldom go to around 75%of max. I'm always pretty well below max. Should I continue as I am or get the oal back to reccomendation of manuals? If I go to max
Oal I will be crimping with the crimp groove hidden by case mouth. Hope I make sense. I'm not as technical or even close as most of you guys.I always try to pick my loads that will fill as much of the case as I can and I try for a medium pressure not max not low just in the middle. Ok enough of my babble. Thanks
Oal I will be crimping with the crimp groove hidden by case mouth. Hope I make sense. I'm not as technical or even close as most of you guys.I always try to pick my loads that will fill as much of the case as I can and I try for a medium pressure not max not low just in the middle. Ok enough of my babble. Thanks